Motherboard bitch.

[NeoNMD]

What connection have I missed? It wont turn on.

I moved everything from a small case to a larger one because the CPU fan was directly infront of the PSU so it overheated but when I put it back together in the new case it doesn't work.

I think its to do with the wires i am holding in the 1st pic and I reckon they go into the connector i am holding it infront of but i have already tried every combination i think.

[Max]

You need to connect the POWER SW (not POWER LED - that just lights the LED on the case when the power is on) to the corresponding jumper on the board, otherwise the power button isn't connected to the board.

[Max]

This diagram I knocked up for you should help:

[NeoNMD]

I got it right. Also the CMOS jumpers were muddled up and the bios couldn't detect the hardrive till I messed about in the alternate bios settings.
I got it all working but now it wants me to activate windows and I cant.

[Max]

CMOS... jumpers? There's only one jumper I can think of that's related to CMOS, and that's the jumper that clears it...

[NeoNMD]

My motherboard is an old Legend QDI. It has 2 bios's that you can switch between. One is an abstract motherboard one and the other is an Avent.
They have jumpers to pick between them and the CMOS battery.

[Max]

Well isn't that quaint.

[NeoNMD]

One of the guys on Overclockers told me that if i wanted to get into the votage settings to overclock the cpu i'd have to use the abstract one as the Award BIOS wouldnt cater for it.